Physical and Mechanical Properties of Medium Density Fiberboard Made of Palm Fronds and Trunks

Authors

  • Mohammed A. Jaber
  • Kadhim J. Hammadi Basra University
  • Alyaa A. Abdul Karem
  • M. Abd-Alrazak

Keywords:

Date palm trunk, date palm fronds, date palm petiole, date palm research center

Abstract

The current study was conducted in both date palm research center and polymers research center / Basrah University during the period 2015-2016 . the result showed that the average length of female trunk fibers ranging between (716 -879) micrometer and its diameter (22.4-22.7) micrometer . The study also showed that the average length and fiber diameter of petiole (leaf base ) and rachis of three cultivars ( Kadrawi ,Zahdi and Sayer ) were not significantly differ and ranging between ( 1010- 1258) micrometer and (14.2-22.6) micrometer respectively. This study also include preparation of medium density fiber board( MDF) made of palm frond and trunk fibers. The flexural strength reach 3.5 Mp and compressive strength reach 6.6 Mp This study also revealed that Bending strength and compressive strength of boards are depending on the ratio of cement added .the physical properties are improved by additive the cement, therefor we can used the cement with the (poly vinylestate and polol ) to improved water absorption and thickness swelling of board. MDF density are about 250-710 Kg/m3. The bending test are about 1.7-3.5 Mp 

Author Biography

Kadhim J. Hammadi, Basra University

Biology Dep.

References

-ASTM C1185 Standard test. Method for sampling and testing Non-Asbestos fiber-cement Flat sheet.2008.

-ASTM C518 ,standard test method for stead-state thermal trans mission properties,2010

- ASTM C150/C150M.Staudard specification for Portland cement 2012.

-ASTM D 1037,Standerd test method for Evaluating properties of Wood-Base fiber and particle material 2012

- Al- Aani and kaser ( 1979 ) .Principle of plant anatomy 2ed. Pp 276. University of Baghdad press

--Al-Khanbashi,A., Al-Kaabi , K. and Hammami A.(2005). Date Palm Fibers as Polymeric Matrix Reinforcement: Fiber Characterization. ARTICLE In POLYMER COMPOSITES • AUGUST 2005

-Al-Oqla FM, Sapuan SM (2014) Natural fiber reinforced polymer composites in industrial applications:

feasibility of date palm fi bers for sustainable automotive industry. J Clean Prod 66:347–354

- Dickison ,W.C. (2000 ) .Integrative Plant anatomy. PP533

- Ebrahim , A, O. ( 2011) .Palm cultivation and production in Iraq. www.Iraqi date palm .net

- Fathi,L. (2014). Structural and mechanical properties of the wood from coconut palms, oil palms and date palms Dissertation (Dissertation ,2014, Hamburg )

- Hegazy ,S.S. and Ahmed K.( 2015 ) Effect of Date Palm Cultivar, Particle Size, Panel Density and Hot Water Extraction on Particleboards Manufactured from Date Palm Fronds

Agriculture. 5, 267-285.

-John A. Youngquist , Harvey Bowers 1997(Medium Density Fiberboard Panels from waste wood and paper).Drewno- Materail Ekologiczny,Warszawa 18-19 listopada

- Johansen D. A. ( 1940). Plant Microtechnique . Tata McGraw- Hill publishing company LTD.

-Megahed, M.M. and El-Mously, H.I.(1995). Anatomical Structure ofDate Palm Leaves' Midrib and its Variation Across and Along theMidrib. A paper, Presented to the IUFRO XX World, Congress,

-12 August, Tampere, Finland

- Mirmehdi, S.M., Omidvar ,A. and Madhoushi ,M. (2010) .Study of Anatomical and Chemical Properties of Date Palm Tree Leaf, Stamaran Cultivar. Journal of Forest and Wood Products (JFWP), Iranian Journal of Natural Resources, Vol. 63, No. 2, 2010. pp.187-200 .f SID

- Paula J. Rudall ( 2007).Anatomy of Flowering plants an introduction to structure and development Cambridge University Press pp 145

- Salem E. Z., A. A. Adam A. A., Entesar A. H., and. Elkady, M.A. ( 2014) Properties of particleboard based on Date palm fronds as renewable Egyptianlignocellulosic materials . International Journal of Innovation and Scientific Research. Vol. 9 No. 2 Sep. 2014, pp. 326-334

- SHENGCHENG , Z. (2013) Anatomical and mechanical features of palm fibrovascular bundles DISERTATION pp127

.

- Soren Halvarsson, Hakan Edlund, and Magnus Norgren.(2010).Weat straw material for manufacture of medium density fiberboard ).Bioresources 5(2)1215-1231.

- Thomas ,R .( 2013) Anatomy of the endemic palms of the Near and Middle East: archaeobotanical perspectives Revue d’ethnoécologie 4, 2013

--Thomas R. & de Franceschi D. 2013 – Palm stem anatomy and Computer-aided identification: the Coryphoideae (Arecaceae). American Journal of Botany.

- Tomlinson, P.B. 1961. Anatomy of the monocotyledons-II Palmae (Ed. Metcalfe, C.R.): 10-

Clarendon Press, Oxford

- Young-Kyu , Sumin Kim, Han-Seung Yang (2003).(Mechanical properties of rice husk flour-wood particleboard by urea-formaldehyde resin).Mokchae Konghak 31(3):42-49.

-.Zimmerman, M. H. and P. B. Tomlinson. 1972. The vascular system of monocotyledonous stems. Botanical Gazette 133:141_155.

Downloads

Published

2016-08-31

How to Cite

Jaber, M. A., Hammadi, K. J., Abdul Karem, A. A., & Abd-Alrazak, M. (2016). Physical and Mechanical Properties of Medium Density Fiberboard Made of Palm Fronds and Trunks. Asian Journal of Applied Sciences, 4(4). Retrieved from https://www.ajouronline.com/index.php/AJAS/article/view/4081

Issue

Section

Articles